干式電力變壓器 Epoxy insulated dry transformers

1.1  概述 Overview

我司提供的環氧樹脂絕緣干式變壓器具有以下特點：

抗短路能力和耐候性強：低壓采用箔式線圈，高壓采用分段圓筒線圈，線圈澆注在環氧樹脂中，線圈采用先進的定向凝膠技術，使環氧樹脂凝膠反應透徹?zé)o應力積聚。具有極好的機械強度和耐候性。

過載能力強，阻燃性好：采用國際先進的飽和填料薄絕緣環氧樹脂真空澆注技術，使產品具有更大的散熱容量和良好的阻燃性能。

耐熱等級高：采用H級環氧樹脂，具有更好的耐熱性能。

局部放量?。赫婵諠沧毫B工藝和均勻的場強設計，避免了澆注時殘留氣泡，局部放電量很小。

環境適應性：帶填料環氧樹脂材料與線圈導體的熱脹系數更加接近，氣溫或負載聚變不會引起樹脂開裂，致密的環氧樹脂絕緣保護層具有百分百的防潮防水性。

The epoxy resin insulated dry-type transformer provided by our company has the following characteristics:

Resistance to short circuit and strong weather resistance: foil coil is used at low pressure, segmenting cylinder coil is used at high pressure, the coil is poured in epoxy resin, and the coil adopts advanced directional gel technology, so that epoxy resin gel reaction is thorough without stress accumulation. Excellent mechanical strength and weather resistance.

Strong overload capacity, good flame retardant: the use of international advanced saturated packing thin insulation epoxy resin vacuum casting technology, so that the product has greater heat dissipation capacity and good flame retardant performance.

High heat resistance grade: H grade epoxy resin is adopted, which has better heat resistance.

Small local discharge: vacuum pouring pressure infiltration process and uniform field strength design, avoid residual bubbles during pouring, local discharge is very small.

Environmental adaptability: the packed epoxy resin material is closer to the thermal expansion coefficient of the coil conductor, the temperature or load fusion will not cause cracking of the resin, and the dense epoxy resin insulation layer has 100% moisture and water resistance.

設備通用技術參數: General technical parameters

項目 project	單位 unit	技術參數 Technical parameters
額定電壓 The rated voltage	KV	10（20、35）/ 0.4
頻率 frequency	Hz	50 / 60
分接范圍 Tapping range		±2x2.5%
絕緣耐熱等級 Insulation grade		F
局部放電量 Local discharge	PC	<10
絕緣水平 Insulation level	KV	10KV  LI75AC35/AC3 20KV  LI125AC55/AC3 35KV  LI200AC85/AC3
噪聲水平 Noise level	dB	JB/T10888
冷卻方式 Cooling way		AN/AF
防護等級 Protection grade		IP20
短路能力 Short circuit capacity		GB1094.5
運行方式		中性點直接接地 Operation mode